Septic Tank Lifters
Loading Information
Item Number | PC Strand Diameter | Part Height | Part Width | Leg Length | Minimum Embedment Depth | Load Rating Tension Stright Up in 3,000 PSI Concrete |
---|---|---|---|---|---|---|
3/8″ | 44″ | 36″ | 10″ | 37 1/2″ | 9,500 Lbs. | |
3/8″ | 51″ | 37″ | 10″ | 37 1/2″ | 9,500 Lbs. | |
1/2″ | 44″ | 44″ | 9″ | 37 1/2″ | 14,000 Lbs. | |
1/2″ | 44″ | 44″ | 9″ | 37 1/2″ | 29,250 Lbs. | |
1/2″ | 51″ | 52″ | 9″ | 37 1/2″ | 14,000 Lbs. |
Item Number | Point A | Points B | Point C | Load Rating Tensions Straight Up in 4,000 PSI Concrete |
---|---|---|---|---|
250-300-275-1000 | 3″ | 2 3/4″ | 10″ | 1,000 Lbs. |
375-400-600-800 | 4″ | 6″ | 8″ | 1,750 Lbs. |
375-400-1200 | 4″ | 5″ | 12″ | 1,500 Lbs. |
¼” x 3” x 2¾” x 10” HAND LIFTER
POWDER EPOXY COATED
(USA) DOMESTIC STEEL AND AMERICAN
FABRICATED ITEM # 250-300-100
LOAD RATINGS WERE ESTABLISHED WHEN THE ¼” X 3” X 2 ¾” X 10” HAND LIFTER WAS
EMBEDDED INTO 4,000 PSI CONCRETE THE MINIMUM EMBEDMENT DEPTH OF 1 ½”.
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
4,000 PSI | 1,000 LBS |
⅜” x 4” x 12” HAND LIFTER
POWDER EPOXY COATED
(USA) DOMESTIC STEEL AND AMERICAN FABRICATED
ITEM # 375-400-1200
LOAD RATINGS WERE ESTABLISHED WHEN THE ⅜” X 4” X 12” HAND LIFTER WAS
EMBEDDED INTO 4,000 PSI CONCRETE THE MINIMUM EMBEDMENT DEPTH OF 1 ⅝”.
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
4,000 PSI | 1,500 LBS |
⅜” x 44” SEPTIC TANK LIFTER WITH GALVANIZED CONDUIT COVERING
(USA) DOMESTIC STEEL AND AMERICAN FABRICATED
ITEM # 375-4400
***SEPTIC TANK LIFTER IS TO BE USED IN TENSION STRAIGHT UP PULL ONLY***
LOAD RATING IS DEPENDENT UPON THE SEPTIC TANK LIFTER BEING EMBEDDED
A MINIMUM OF 37.5” INTO 3000 PSI CONCRETE
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
3,000 PSI | 9,500 LBS |
⅜” x 51” SEPTIC TANK LIFTER WITH GALVANIZED CONDUIT COVERING
(USA) DOMESTIC STEEL AND AMERICAN FABRICATED
ITEM # 375-5100
***SEPTIC TANK LIFTER IS TO BE USED IN TENSION STRAIGHT UP PULL ONLY***
LOAD RATING IS DEPENDENT UPON THE SEPTIC TANK LIFTER BEING EMBEDDED
A MINIMUM OF 37.5” INTO 3000 PSI CONCRETE
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
3,000 PSI | 9,500 LBS |
½” x 44” SEPTIC TANK LIFTER WITH GALVANIZED CONDUIT COVERING
(USA) DOMESTIC STEEL AND AMERICAN FABRICATED
ITEM # 500-4400
***SEPTIC TANK LIFTER IS TO BE USED IN TENSION STRAIGHT UP PULL ONLY***
LOAD RATING IS DEPENDENT UPON THE SEPTIC TANK LIFTER BEING EMBEDDED
A MINIMUM OF 37.5” INTO 3000 PSI CONCRETE
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
3,000 PSI | 14,000 LBS |
½” x 44” DOUBLE SEPTIC TANK LIFTER
WITH GALVANIZED CONDUIT COVERING
(USA) DOMESTIC STEEL AND AMERICAN FABRICATED
ITEM # 500-4400-00
***SEPTIC TANK LIFTER IS TO BE USED IN TENSION STRAIGHT UP PULL ONLY***
LOAD RATING IS DEPENDENT UPON THE SEPTIC TANK LIFTER BEING EMBEDDED
A MINIMUM OF 37.5” INTO 3000 PSI CONCRETE
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
4,000 PSI | 1,000 LBS |
½” x 51” SEPTIC TANK LIFTER
WITH GALVANIZED CONDUIT COVERING
(USA) DOMESTIC STEEL AND AMERICAN FABRICATED
ITEM # 500-5100
***SEPTIC TANK LIFTER IS TO BE USED IN TENSION STRAIGHT UP PULL ONLY***
LOAD RATING IS DEPENDENT UPON THE SEPTIC TANK LIFTER BEING EMBEDDED
A MINIMUM OF 37½” INTO 3000 PSI CONCRETE
LOAD RATINGS COMPLY WITH OSHA 1926.704 (C) 4:1 SAFETY FACTOR
Concrete Strength | Tension Straight Up |
---|---|
3,000 PSI | 14,000 LBS |